LED lighting industry adhesive applications and solutions |
||
| Reading Volume： 【 282 】 | Time： 【 2023-08-07 】 | |
 LED lighting is now widely respected energy-saving lighting, from home, commercial lighting, outdoor, and other lighting applications, LED is considered a better way of lighting, China is the global electronics industry manufacturing base, in the development of the LED industry occupies an important position, the formation of a complete industrial chain from the production of epitaxial wafer LED chip preparation, packaging and application, LED industry chain has an important segment, that is, the application of adhesives, and the corresponding automatic dispenser. An important segmentation of the LED industry chain, that is, the application of adhesives, as well as the corresponding automatic dispenser automatic filling machine application, adhesives in LED lighting products play a role mainly includes: bonding, sealing, thermal conductivity, flame retardant protection and other efficacy, the quality of the adhesive affects the safety and stability of the product, fogging translucent, aging durability and other properties. Common uses of adhesives in LED ● Lamp bezel bonding sealing ● Potting waterproof thermal protection ●Aluminum substrate auxiliary heat dissipation ●Driver power supply thermal conductivity and flame retardant ●Three-proof protection for circuit board coating Application examples: 1. LED street light adhesive introduction Mask, panel and frame adhesive sealing Substrate: PMMA or glass mask plastic panel and aluminum frame. Requirements: high transparency, non-yellowing; non-corrosive PMMA, good adhesion between mask and aluminum frame, high thixotropy, no drooping flow. Aging resistance, good insulation properties. Low stress, moderate hardness, elongation at break 240% or more. LED lamp particles and aluminum substrate thermal conductivity bonding Requirements: good wettability, helps to fill the gap, so that the contact thermal resistance is smaller; Excellent thermal conductivity; excellent electrical insulation; Wider use temperature: operating temperature -50 ~ 200 ℃; No drying or oil flow at high temperature; Thermally conductive potting of power supplies Requirements: excellent thermal conductivity; excellent electrical insulation; a wide range of use temperature: operating temperature -50 ~ 200 ℃; high temperature does not dry, no oil flow; non-toxic, tasteless, non-corrosive, environmentally friendly. 2. Introduction of adhesive for LED blocking tube Plug PC and PC adhesive sealing Requirements: non-corrosive PC, development trend: ultrasonic process + UV glue; Recommended products: transparent one-component silicone Line board potting protection Requirements: good sealing performance. Recommended products: transparent or milky white silicone Plug the inner groove shallow potting (waterproof, outlet hole positioning) Requirements: sealing tight; colloid not yellowing, aging resistance Recommended products: silicone or epoxy adhesive 3. LED soft strip glue introduction Potting of soft light bar Requirements: small color temperature deviation, deviation ≤ 2000K; good adhesion, excellent sealing performance; good toughness of the adhesive layer, no cracking; no yellowing, good aging resistance. Flexible strip light plug bonding Requirements: good adhesion, non-yellowing and non-aging; transparent color. 4. LED bulb lamp adhesive introduction (Lamp head, lens) structure bonding Lamp head bonding: metal and PC/PMMA adhesive sealing Built-in power supply thermal conductivity potting Requirements: excellent flame retardant, thermal conductivity; fast curing speed; can be deep curing; good high temperature aging resistance, low stress; good mobility and bubble exclusion, can penetrate into the gap of small components. Thermal conductive bonding of LED light source and alloy lamp body Thermal conductivity and bonding of LED light source and alloy lamp body Requirements: high thermal conductivity, high adhesion; PCB board coating three-proof protection Requirements: low viscosity, its strength, suitable for coating process, protection of components. 5. Introduction of adhesive for T8 lamp Lamp head metal/PC and glass adhesive sealing Requirements: de-alcoholized silica gel, does not corrode PC; sealing tightly, the gel is not yellowing, aging resistance. LED module and aluminum substrate thermal conductivity Requirements: good wettability, help to fill the gap, so that the contact thermal resistance is smaller; excellent thermal conductivity; a wide range of operating temperature: operating temperature -50 ~ 200 ℃; high temperature does not dry, no oil flow. Lamp board adhesive fixing Requirements: Flame retardant highest level V-0; Suitable for flame retardant parts adhesive sealing. |
||
| Page【1】 | ||
| Previous： Inductor coil potting solut | ||
| Next： Jiadi New Material-Micro in | ||
| Other information | ||
TEL：0769-82963828
E-mail：yqyq55555@163.com
FAX：0769-82963827
Address：No.1 Chongming Road, Shipai Town, Dongguan City, Guangdong Province
Chinese
